Brick chimney stack on a roof being renewed, our chimney repairs service for homes and businesses

Local, Reliable, Professional

Chimney Repairs in Preston

Re-pointing, pot and flashing repairs for chimney stacks that have started letting the weather in.

  • Free, no obligation quotes
  • Experienced, fully insured team
  • High quality, long lasting results
  • Covering Preston and surrounding areas

Get a Free Roofing Quote

Tell us what you need and we'll get back to you as soon as we can.

We only use these details to reply to your enquiry and prepare your quote. We do not share them for marketing and we keep them for up to 12 months. Read our privacy notice.

  • Free Quotes No obligation

  • Fully Insured For your peace of mind

  • Local Team Preston & surrounding areas

  • Trusted Locally Built on recommendations

Chimney Repairs

The part of your roof nobody looks at

Weather hits a chimney stack on all four sides, and a working flue can attack it from the inside as well, because sulphur gases erode the mortar. It also sits where few people ever look closely. Cracked mortar around the pots or hollow joints can go unnoticed until a damp patch appears on a chimney breast or bedroom ceiling. By then, water may have been soaking into the brickwork for some time.

Worn joints on a stack are raked out and re-pointed. Cracked flaunching, the sloped mortar bed that holds the pots, is renewed so it sheds water again, and loose pots are re-set. The flashings get the same attention, as the back gutter, the lead channel behind a stack, is one of the likeliest places for a leak to start. We do this work on houses and commercial buildings across Preston, and if the stack is sound and the fault lies elsewhere, you will hear that from us.

The mortar is a decision in itself. A stack built in lime needs different treatment from a modern one built in cement, and the exposed position of a chimney usually calls for a stronger mix than a sheltered wall would need. So the first job is finding out what your stack was built with. Repairs are explained to you in plain terms, then quoted separately, so you know exactly what you are agreeing to.

  • Re-pointing worn mortar joints
  • Renewing cracked flaunching
  • Re-setting loose chimney pots
  • Lead flashings around the stack
  • Back gutters and front aprons
  • Repairs to weathered brickwork
Brick chimney stack seen from the scaffold, a closer view from our chimney repairs service

When to Call Us

Warning signs on and around the stack

  • Damp on the chimney breast

    Damp showing on a chimney breast, or on the ceiling beside it, often traces back to failed flashings, cracked flaunching or rain entering an open flue. Blocked flues can cause damp too, so the cause needs finding before anything is repaired.

  • Crumbling mortar and loose pots

    Bits of mortar landing on the roof or collecting along the gutter can mean the joints or flaunching are breaking down. A pot held by failed flaunching can be shifted by high winds, and a falling pot is a real danger to anyone below.

  • A lean, bulge or horizontal cracks

    Old stacks often develop a slight lean without being dangerous, but any movement should be assessed. Horizontal cracks along the joints can point to sulphate attack in wet masonry. A bulge may mean structural movement, so get professional advice.

How We Work

Reaching the stack safely and repairing it

  1. Follow the damp to its cause

    Joints, flaunching, pots and flashings are examined, and where damp is showing we check inside the loft or room below, so the repair deals with the cause.

  2. A proper working platform first

    Where a task keeps someone on a leaning ladder for over 30 minutes at a time, the Health and Safety Executive recommends other equipment. Re-pointing a stack needs a proper working platform, so access is planned first.

  3. Joints, flaunching, then flashings

    Worn joints are raked out and re-pointed, failed flaunching is replaced and shaped to throw water clear, and flashings are refixed or renewed. The work follows what was agreed in your quote.

  4. Clear the stack, check the tiles

    Before access comes down, mortar and debris are cleared away, gutters are checked and the tiles around the stack are looked over. Anything further that needs doing is explained and priced as a separate item.

Our Work

Examples of Our Roofing Work

Photos from roofs we have worked on across Lancashire.

  • Brick chimney stack under repair, seen from the scaffold, a photo from our chimney repairs service
  • Brick chimney stack above a slate roof with terraces beyond, shown as part of our chimney repairs service
  • Tall terracotta chimney pots against a blue sky, the kind of chimney repairs we take on
  • Tall terracotta chimney pot on a brick stack, part of how we approach chimney repairs

See the full gallery

Questions

Chimney Repairs Questions

My chimney is shared with next door. Who deals with repairs?

Both owners usually have a say, so raise it with next door before anything is arranged. A stack built on a party wall may come under the Party Wall etc. Act 1996, and repairing or rebuilding a party structure can require written notice. Very minor work may not, and where work is needed because of disrepair the two owners can share the cost. A party wall surveyor can advise if the position is unclear.

Should a chimney we no longer use be capped?

Usually, but it still has to breathe. Historic England advises a ventilated cap, which keeps out rain and birds while air keeps moving through the flue. Seal it tight and trapped moisture can cause damp and staining indoors. A blocked fireplace below may need a vent too. Never seal a flue that still serves a fire or boiler, and leave any active bird's nest alone, because it has legal protection.

Can a leaning chimney stack be saved or must it come down?

That rests on the cause and the amount of movement. Many older stacks have a small lean and can stay in place with the right repairs. A pronounced lean needs a structural engineer to confirm if the stack can be made safe without rebuilding. Taking a stack down can bring in Building Regulations, especially below roof level. Conservation area or listed status can add further consents, so your council is the place to start.

Lime or cement, which mortar suits an older chimney?

If the stack was built in lime, it should normally be re-pointed in lime. Historic England warns that hard cement mortar traps moisture in the wall, and that speeds up the decay of the bricks around it. That advice is for older work, not a modern stack built with cement mortar. On a listed building, the choice of mortar is one to take to your council's conservation officer.

Related Services

More Ways We Can Help

  • Lead flashing around a brick chimney stack, lead work from the team behind our chimney repairs

    Lead Work

    Sheet lead flashings, valleys and detail work on every type of roof.

  • Roofer repairing a valley on a dark tiled roof, roof repairs from the team behind our chimney repairs

    Roof Repairs

    Reliable roof repairs to keep your property protected.

  • New pitched roof in red and brown interlocking tiles, pitched roofing from the team behind our chimney repairs

    Pitched Roofing

    New roofs, re-roofs and professional repairs.

Brick house with a dark tiled gable roof, ask us for a free quote for chimney repairs

Need Help With Chimney Repairs?

Get in touch today for a free, no obligation quote.