Slate roof under a blue sky, our slating service for homes and businesses

Local, Reliable, Professional

Slating in Preston

Slipped slates put right and worn out roofs re-slated, with sound slates saved and reused wherever they can be.

  • Free, no obligation quotes
  • Experienced, fully insured team
  • High quality, long lasting results
  • Covering Preston and surrounding areas

Get a Free Roofing Quote

Tell us what you need and we'll get back to you as soon as we can.

We only use these details to reply to your enquiry and prepare your quote. We do not share them for marketing and we keep them for up to 12 months. Read our privacy notice.

  • Free Quotes No obligation

  • Fully Insured For your peace of mind

  • Local Team Preston & surrounding areas

  • Trusted Locally Built on recommendations

Slating

The nails usually give out before the slate does

Slate is rarely the first part of an old roof to fail. Iron nails rust through while the slate around them is still sound, and once they go the slates begin to slip, a problem roofers call nail sickness. Slate is part of the look of Preston's older streets, and the city council picks out slate roofs as part of the visual harmony of Avenham's terraces. A roof like that deserves a careful assessment before anyone suggests stripping it.

Isolated slips are straightforward to fix. Widespread slipping tells a different story, because the nails have usually failed throughout, and conservation guidance from Bradford Council suggests replacing the roof once more than one slate in five needs attention. A re-slate lets us check every slate, set the sound ones aside for reuse and make up the shortfall with new slate of matching size and colour. Should further repairs come to light, they are agreed with you first and priced individually.

We work with all slate products and use materials that meet high standards. Roofers generally choose between natural slate, fibre cement slate and reconstituted slate. For natural slate, BS EN 12326 grades water absorption, thermal cycling and resistance to sulphur dioxide, so the grades are worth asking about. Overlap matters too. Headlap is set by pitch and exposure, and slate manufacturer guidance generally treats anywhere within 30 miles of a west facing coast as severe exposure, which takes in Preston.

  • Slipped slates refixed, broken ones replaced
  • Strip and full re-slate
  • Sound slates sorted and reused
  • All slate products
  • Ridge, hip and valley details
  • Battens and underlay renewed
  • Domestic and commercial slate roofs
Slate roof with a chimney stack under a blue sky, a closer view from our slating service

When to Call Us

Reading the condition of a slate roof

  • Slates creeping down the slope

    Narrow metal strips holding slates in place are called tingles, a temporary repair that often marks earlier trouble. A lot of them, or a scatter of displaced slates, suggests the nails are failing across the roof. One displaced slate on its own is a small job.

  • Slates that flake or crumble

    Sound slate is hard and dense. Once a slate starts to flake or turn soft it can hold water and pass damp on to the timbers beneath. Slates in that state cannot be saved and should come off the roof.

  • Tar or coatings over the slates

    Some old roofs have been coated to keep them going a little longer. Coatings can crack and let water in, and they can seal up the roof space, which can lead to fungal attack in the timbers. They can also leave the slates unfit for reuse.

How We Work

Taking a slate roof off and putting it back

  1. Record the existing roof

    While the roof is still intact, we note the slate size, coursing and details. Many older roofs use diminishing courses, larger at the eaves and smaller near the ridge, and that pattern should go back.

  2. Strip, tap and sort

    Slates are taken off carefully and checked one by one. A light tap is a useful guide, because a sound slate rings clearly and a failing one sounds dull.

  3. Timber checked, battens and underlay renewed

    Once the rafters are exposed we check the timber, and any timber repairs are talked over with you. New battens and underlay then go on.

  4. Slate back up from the eaves

    Natural slates are sorted by thickness, with the thickest near the eaves, then fixed with corrosion resistant nails at the correct headlap. Ridges and valleys finish the roof, and our guarantee applies to the work.

Our Work

Examples of Our Roofing Work

Photos from roofs we have worked on across Lancashire.

  • Slate roof slope seen from the scaffold, a photo from our slating service
  • New valley between two slate roof slopes, shown as part of our slating service
  • Slates cut back to a new valley with fresh battens and membrane, the kind of slating we take on
  • Grey slates being laid over red breathable membrane, part of how we approach slating

See the full gallery

Questions

Slating Questions

Do slipping slates always mean a full re-slate?

No, not if the problem is confined to a small area. A slipped or broken slate can be replaced with a matching one and held with a proper mechanical fixing. Adhesive and silicone are not repairs, and slates stuck down that way tend to come loose again. If slipping carries on in different parts of the roof, the nails have probably failed throughout and a re-slate is worth discussing.

Is fibre cement or concrete a fair swap for natural slate?

Sometimes, but weigh it up first. A covering 15 per cent or more heavier than the one it replaces will normally have to go through building control, and any change in weight calls for an assessment of the structure. How the roof will look counts as well. A different material can alter the character of a listed building and may need consent, and a conservation area can have its own controls.

What about asbestos in older man made slates?

The Health and Safety Executive lists asbestos cement slates among the materials found on homes, and says asbestos can be present in buildings built or refurbished before 2000. Natural slate is not the concern here. If your roof has man made slates of unknown age, get them tested before they are cut, drilled or stripped.

What should I ask for when choosing natural slate?

Ask for the grades under BS EN 12326 rather than a general statement that the slate conforms. W1 means water absorption of 0.6 per cent or less, T1 is the top thermal cycle grade and S1 is the top result for sulphur dioxide resistance. Find out which quarry the slate comes from, and compare its size and colour with what is on your roof.

Related Services

More Ways We Can Help

  • New pitched roof in red and brown interlocking tiles, pitched roofing from the team behind our slating

    Pitched Roofing

    New roofs, re-roofs and professional repairs.

  • Lead flashing around a brick chimney stack, lead work from the team behind our slating

    Lead Work

    Sheet lead flashings, valleys and detail work on every type of roof.

  • Roofer repairing a valley on a dark tiled roof, roof repairs from the team behind our slating

    Roof Repairs

    Reliable roof repairs to keep your property protected.

Brick house with a dark tiled gable roof, ask us for a free quote for slating

Need Help With Slating?

Get in touch today for a free, no obligation quote.