Grey membrane flat roof finished with metal edging, our single ply roofing service for homes and businesses

Local, Reliable, Professional

Single Ply Roofing in Preston

Electronic testing pinpoints the break in your membrane, so the patch goes on the fault and nowhere else.

  • Free, no obligation quotes
  • Experienced, fully insured team
  • High quality, long lasting results
  • Covering Preston and surrounding areas

Get a Free Roofing Quote

Tell us what you need and we'll get back to you as soon as we can.

We only use these details to reply to your enquiry and prepare your quote. We do not share them for marketing and we keep them for up to 12 months. Read our privacy notice.

  • Free Quotes No obligation

  • Fully Insured For your peace of mind

  • Local Team Preston & surrounding areas

  • Trusted Locally Built on recommendations

Single Ply Roofing

Finding and fixing faults in single ply membranes

Single ply leaks can start small. The membrane is one thin, flexible sheet, so a cut from a dropped tool or a joint that has opened can let water straight into the layers below. From there it can spread through the roof unseen, which means the drip indoors may be a long way from the break. Opening up the roof to hunt for it, or patching by guesswork, risks disturbing membrane that was perfectly sound.

We use electronic roof testing to pinpoint membrane leaks instead. PVC and similar sheets do not conduct electricity, so a small test current can only reach the deck where the sheet is broken. Tracing that current leads to the fault, and large roof areas on commercial and industrial buildings around Preston can be checked methodically. The method has limits. There must be a conductive path beneath the sheet, and gravel, paving or planting on top rules out some methods, so the build up gets checked before we rely on a result.

Fatra, Protan, SpectraROOF and Trocal are among the single ply systems we have spent many years repairing and maintaining. Identifying the sheet comes first, because a repair has to be compatible with what is already on the roof. Weathered membrane must be cleaned thoroughly before a patch will weld to it, and every weld needs checking afterwards. If a sheet can no longer hold a repair, we will say so and go through your options.

  • Electronic membrane leak testing
  • Single ply repairs and patching
  • Single ply roof maintenance
  • Fatra, Protan, SpectraROOF and Trocal membranes
  • Laps, upstands and penetrations checked
  • Commercial, industrial and domestic buildings
Grey flat roof covering meeting a tiled slope, a closer view from our single ply roofing service

When to Call Us

Problems to watch for on membrane roofs

  • Leaks that seem to move

    Water that shows in one bay after rain and somewhere else the next time is often travelling inside the roof. Patches in the wrong place leave wet layers behind, so the break has to be located first.

  • Damage around plant and walkways

    Damage tends to gather around plant, rooflights, pipes and the routes people walk to reach them. Dropped tools and foot traffic can puncture a sheet without anyone noticing. Joints lifting at the edge need attention before rain is driven underneath.

  • Membrane pulling tight or ballooning

    A sheet that has shrunk tight at its edges, is pulling at the upstands or balloons around flashings and seams is showing distress. Standing water is another warning. Dirt settles in it, outlets can clog and the deck takes extra load. Both call for an early look.

How We Work

Testing the membrane, then repairing what the test finds

  1. Establish the roof build up

    Testing only works if the build up allows it, so the membrane, how it is held down and what lies beneath it all have to be identified. That also shows which repair materials are compatible.

  2. Test and mark the breaks

    The membrane is tested electronically, working across the roof in a methodical way. Each break is marked so that repairs go exactly where water is getting through.

  3. Go through the test results

    The findings and their likely cause are laid out for you. All necessary repairs are discussed in detail and quoted for separately, so you can decide with the facts in front of you.

  4. Clean, patch and prove the weld

    The area around each break is cleaned and dried, then a compatible patch is fixed over it. Welded joints are checked to confirm the bond, and our guarantee stands behind the repair.

Our Work

Examples of Our Roofing Work

Photos from roofs we have worked on across Lancashire.

  • Grey rubber flat roof with a neat metal edge trim, a photo from our single ply roofing service
  • Black flat roof membrane laid around a chimney, shown as part of our single ply roofing service
  • Finished grey rubber flat roof meeting a tiled slope, the kind of single ply roofing we take on
  • Black flat roof membrane laid beside a tiled slope, part of how we approach single ply roofing

See the full gallery

Questions

Single Ply Roofing Questions

How does electronic testing find a hole in a membrane?

The test relies on the membrane acting as an insulator. With a conductive deck or layer beneath it, any hole gives a small electrical current a path through the sheet, and the equipment traces that path to the fault. Gravel, paving or planting on top rules out some methods, and black EPDM rubber generally conducts electricity, so not every roof can be tested in the same way.

Will an older single ply sheet still take a repair?

Often it will, provided the sheet is sound enough to hold one. Weathered membrane needs thorough cleaning before welding, and a trial weld shows whether it will bond. Where the sheet has gone brittle or a patch will not take, further repairs stop making sense. We will give you an honest answer on yours before any repair is priced.

Does an old felt roof have to come off before single ply goes on?

An old roof can sometimes stay, but it has to be suitable. PVC membrane cannot go straight onto bitumen without an isolating layer, because the two materials are incompatible. Replacing the waterproofing can also bring insulation requirements under Approved Document L into play, so the whole build up needs thinking through. Talk to building control ahead of any renewal.

How often should a single ply roof be inspected?

At least twice a year, with early spring and late autumn the preferred times. The aim is to catch damage and clear debris before outlets block and water starts standing on the membrane. Anyone working on plant up there should report damage they notice. Roof access itself is dangerous, so leave inspections to people trained and equipped to do them safely.

Related Services

More Ways We Can Help

  • Finished grey rubber flat roof beside a tiled slope, flat roofing from the team behind our single ply roofing

    Flat Roofing

    Durable, weatherproof flat roofing for homes and businesses.

  • Roofer repairing a valley on a dark tiled roof, roof repairs from the team behind our single ply roofing

    Roof Repairs

    Reliable roof repairs to keep your property protected.

  • Lead flashing around a brick chimney stack, lead work from the team behind our single ply roofing

    Lead Work

    Sheet lead flashings, valleys and detail work on every type of roof.

Brick house with a dark tiled gable roof, ask us for a free quote for single ply roofing

Need Help With Single Ply Roofing?

Get in touch today for a free, no obligation quote.