Dark tiled roof with two roof windows, our roof windows service for homes and businesses

Local, Reliable, Professional

Roof Windows in Preston

Roof windows and skylights supplied and fitted across Preston, bringing daylight and fresh air into the rooms under your roof.

  • Free, no obligation quotes
  • Experienced, fully insured team
  • High quality, long lasting results
  • Covering Preston and surrounding areas

Get a Free Roofing Quote

Tell us what you need and we'll get back to you as soon as we can.

We only use these details to reply to your enquiry and prepare your quote. We do not share them for marketing and we keep them for up to 12 months. Read our privacy notice.

  • Free Quotes No obligation

  • Fully Insured For your peace of mind

  • Local Team Preston & surrounding areas

  • Trusted Locally Built on recommendations

Roof Windows

Cutting into a roof and keeping it watertight

Set into the slope of a pitched roof, a roof window normally opens. The words skylight and rooflight cover a wider range of glazing, including units made for flat roofs. All of them bring in daylight from above, and all of them mean cutting a hole in the part of the building that keeps the weather out. Done badly, that hole becomes a leak, so we look at the roof before we talk about sizes.

The opening generally means cutting away part of one or more rafters. The cut ends need new support, usually timber trimmers across the top and bottom, and the rafters either side may need strengthening because they now carry more load. Trussed rafters cannot be handled that way. They should not be cut or altered unless the truss designer has approved the change, so our quote starts with finding out how your roof is built. That one check can change the size or position of the window.

Weatherproofing comes next. The joint between frame and roof is usually made with a flashing kit or with lead, and kits are made to suit the covering. A deep profiled tile, a plain tile and a flat slate each need a different one. Most standard kits are made for pitches of 15 degrees and steeper, and some need more. We match the window and flashing to your roof, then work sheet lead in where a junction calls for it.

  • Supply of roof windows and skylights
  • New openings in existing roofs
  • Replacement of failed roof windows
  • Rafter trimming and strengthening
  • Flashings matched to your roof covering
  • Insulation around the new frame
  • Homes and commercial or industrial buildings
Dark tiled roof with two roof windows under a blue sky, a closer view from our roof windows service

When to Call Us

Good reasons to add or replace a roof window

  • Misting between the glass panes

    Moisture trapped between the panes means the seal on the glazed unit has failed. Wiping will not clear it and the window no longer insulates as it should. Depending on the condition of the frame, the answer is a new glazed unit or a complete new window.

  • Staining on the lining below

    Marks under a roof window can come from failed flashings, slipped tiles above the frame or condensation running off the glass. Each has a different cure, so the cause is traced on the roof and a replacement is only suggested if you need one.

  • A dark room under the roof

    Top floor rooms and landings often rely on one small window or none at all. Glazing in the roof slope faces the open sky, so it brings daylight into spaces a wall window cannot reach, and an opening window helps clear warm, stale air.

How We Work

Fitting a new window into an existing slope

  1. Match the window to the rafters

    Pitch, covering and rafter layout show what the roof will take, and the room shows where the window should sit. Together they settle which sizes will work and whether any approval is needed first.

  2. Cut and support the opening

    Tiles or slates are stripped back and any rafters in the way are cut to the agreed opening. New trimmers go in, neighbouring rafters are strengthened where the structure needs it, and the frame is fixed in position.

  3. Weatherproof around the frame

    The underlay is dressed in to the frame, the flashing kit goes on and the covering is cut and laid back around the window. Sheet lead is used where a junction needs it.

  4. Insulate and line the opening

    Insulation goes around the frame to limit heat loss, and air is kept moving through the roof void. The opening is then lined, and we show you how the window operates.

Our Work

Examples of Our Roofing Work

Photos from roofs we have worked on across Lancashire.

  • Roof window fitted into a grey tiled roof, a photo from our roof windows service
  • Foil backed insulation fitted around a roof window in a loft conversion, shown as part of our roof windows service
  • Finished dormer with dark hanging tiles and white windows, the kind of roof windows we take on
  • Dormer with two white windows and dark tile hanging, part of how we approach roof windows

See the full gallery

Questions

Roof Windows Questions

Will the planners need to approve my new roof window?

On a house, often not. Under Planning Portal guidance, rooflights usually fall within permitted development if they project no more than 150mm from the roof slope and sit no higher than the roof's highest part. A window on a side facing slope has to be obscure glazed, and fixed unless the opening part is more than 1.7 metres above the floor. Flats are not covered, and listed buildings or conservation areas can bring extra controls, which your council can confirm.

Do roof windows need Building Regulations approval?

A new one generally does, because the roof structure is altered and the window has to limit heat loss. Replacing one needs approval too, unless the installer is registered with a competent person scheme that covers the work. Otherwise it goes through a building control body. Before anything starts we will explain how your job will be handled. Hold on to the certificate, as it may be needed when you sell.

Why does water run down my roof window on cold mornings?

That is usually condensation, not a leak. Warm, moist air from cooking, showers and drying clothes meets the cold glass and turns back into water. Airing the room and using extractor fans normally reduces it. If water appears only when it rains, the flashings or the roof around the window need checking, and that is something we can look at for you.

Would a roof window work as an escape window in a fire?

Only where the room is low enough. Approved Document B asks for an opening of at least 0.33 square metres, at least 450mm high and wide, with its bottom edge no more than 1100mm above the floor. That suits a room no more than 4.5 metres above ground, such as a bungalow loft. Higher up, escape normally relies on a protected stairway, so ask building control early.

Related Services

More Ways We Can Help

Brick house with a dark tiled gable roof, ask us for a free quote for roof windows

Need Help With Roof Windows?

Get in touch today for a free, no obligation quote.